page contents
How to Apply Sisers Metal EasyWeed Heat Transfer Vinyl

How to Apply Sisers Metal EasyWeed Heat Transfer Vinyl

Posted by Ribbon Queen Canada on 2018 Nov 9th

How to Apply Sisers Metal HTV (Gold or Silver HTV) When choosing supplies for your DIY projects, it’s important to have a plan in place. This allows you to ensure that you gather all of the items you require including the knowledge on how to apply them.

Get that Metallic Foil Look with a Super Soft Feel!

**Do you know about the Heat Press Weeding Trick?? if not you can view here, weeding doesn’t have to be a chore, see the utube video here the time saving by using a heat press-this will make your life a lot easier (Heating the platen and weeding the design on a heated surface. Feel free to share this with your friends and on facebook!!


What are the cutter settings for my Cricut with Siser Metal HTV?

  • Blade: Standard
  • Setting: Iron on

What are the cutter settings for my Silhouette Cameo with Siser Metal HTV?

  • Blade: Standard, 2
  • Material: Heat Transfer, Smooth
  • Speed:8
  • Force: 6

What are the cutter settings for my Scan N Cut with Siser Metal HTV?

  • Blade: Standard, 2
  • Cut Speed:1
  • Cut Pressure:3

What are the cutter settings for my Roland GS/GX-24 with Siser Metal HTV?

  • Blade: 4°
  • Gram Force: 80-90
  • Offset: .250
  • Speed: 30-50cm/s

What are the cutter settings for my Graphtec with Siser Metal HTV?

  • Blade: 45°
  • Gram Force: 8-9
  • Tool” CB09U+0
  • Speed: 30cm/s

What are the Application Instructions for Siser Metal HTV with a Heat Press?

  • Cut in reverse
  • Weed excess material
  • Preheat garment for 2-3 seconds
  • Apply design at 305°F/150°C
  • Use medium pressure for 10-15 seconds
  • Peel carrier COLD

What are the Application Instructions for Siser Metal HTV with a Home Iron?

  • Set iron dial between Cotton and Linen
  • Cover design with Krafter paper or a non stick cover sheet
  • Place on a flat, hard surface (not an ironing board)
  • Press iron with medium/firm pressure (do not slide iron)
  • Press each section of the design for 10-15 seconds
  • If areas of design lift after application replace cover sheet and re press for 5-10 seconds
  • Peel carrier COLD

Looking to buy some silver or gold metal HTV, Ribbon Queen Canada has it available to purchase online here Metal Easyweed HTV