Blackboard Iron on Vinyl is a thin and matte finish heat transfer vinyl (HTV), that has the ability to be drawn on with chalk, just like an actual chalkboard at school. To clean off the chalk, simply wipe down the blackboard iron on vinyl with a damp cloth. By running the article through the wash you get a completely clean slate. Note: blackboard is currently not compatible with chalk crayons or chalk markers as they do not easily wipe off, you should recommend to your customers that they stick to using standard classroom chalk or sidewalk chalk.
Blackboard is CPSIA certified
Thickness: 95 microns
Applies to: 100 cotton, 100 Polyester, Polyester, Cotton Blends
Temperature: 275F or 135C
Time: 15 seconds
***Layering not reccommended**
Peel: Warm or Cold
Wait 24 hours before first wash of blackboard applied garment.
Machine wash warm or cold with mild detergent.
Dry on low dryer setting
Do not dry clean or bleach
wipe away chalk before washing.
Circuit Cutting Settings for Chalkboard
Blade: Standard, Setting: Paper
Silhouette Cameo Cutting Settings for Chalkboard
Blade: Standard, 3, Material: Heat Transfer, Smooth, Speed:5, Thickness: 8
Scan N Cut Cutting Settings for Chalkboard
Blade: Standard, 2, Cut Speed:1, Cut Pressure:1
Roland GS/GX-24 Cutting Settings for Chalkboard
Blade: 45°, Gram Force: 70-80, Offset: .250, Speed:50cm/s
Graphtec Cutting Settings for Chalkboard
Blade: 45°, Gram Force: 7-8, Total: CB09u+0, Speed:50cm/s
Titan Series Cutting Settings for Chalkboard
Blade: 45°/ 60°, Gram Force: 75-80, Speed:180mm/s, Blade Advancing Varies
What are the Blackboard Iron on Vinyl Application Instructions for home iron?
What are the Blackboard HTV Vinyl Application Instructions for my heat press?